Sleigh Ride Surprise Die Focused Card with Tina H

Hello crafters, it’s Tina with a cute Christmas card featuring the fun Sleigh Ride Surprise Die set. I love the large size of the sleigh and all the accessories you can add to fill it up.

Starting with a white card base, I then created a white rectangle panel with the outer die from the Frilly Frames Stripes die, dry embossed with the Cable Knit folder. This folder is perfect for all your holiday cards! I also created a small snowbank for my scene.

To make my sleigh stand out, I used a bright blue patterned paper from the Preppy Prints pack with a white border. I cut the presents, trees, and bows from white paper and colored them with Distress Oxides in blue and pink tones. 

Of course I had to add a cute penguin from Penguin Party. I added foam tape to adhere the sleigh to the scene, which made it easier to glue all the other elements in place. 

I stamped the sentiment from Reindeer Games on an arched Brilliant Banner 2 Die with Versafine Onyx Black ink. I like how the size of this banner perfectly matches this design. To add that winter sparkle, I used a white Posca pen for the snowflakes and Glitter Stickles for that extra shine.

I am really excited about this fun set. I can’t wait to see your creations with these dies! Thank you for joining me, and happy crafting!

Sunny Studio Supplies Used:

Sleigh Ride Surprise Shop at: Sunny Studio	Frilly Frames Stripes Die Shop at: Sunny Studio	Preppy Prints 6x6 Paper Shop at: Sunny Studio	Cable Knit Embossing Shop at: Sunny Studio
Penguin Party Stamps Shop at: Sunny Studio	Penguin Party Dies Shop at: Sunny Studio	Reindeer Games Stamps Shop at: Sunny Studio	Brilliant Banner 2 Dies Shop at: Sunny Studio

Treat Bag Topper Die Focused Treat Bag with Marieke

Hello all, Marieke here. I'm back again with my weekly post for Sunny Studio Stamps. Today I hope to inspire you with a card that I made using the Treat Bag Topper Dies.

Cut the Treat Bag Topper dies using the Joyful Holiday Paper and white cardstock. Adhered them together and set them aside. Stamped the bear out of Holiday Hugs and cut him using the matching Holiday Hugs dies before coloring.

Cut the bear using the Treat Bag Topper Dies so the scallops would match the topper. Colored up the bear using my Copic markers. Using a craft knife I cut the hands so I could fit in the mug later.

Used Copic Colors:
Bear - C5, C3, C1, C00, 0 / R22, R20, R00
Black - N8, N6, N4, N2
Teal - BG15, BG13, BG11, BG10
Green - YG17, YG13, YG11
Pink - R85, R83, R81
Blue - B02, B00, B000
Red - R59, R29, R24
White - W5, W3, W1
Chocolate - E44, E43, E41

Stamped the mug using the Holiday Hugs and colored it up, cut it using the matching Holiday Hugs dies and adhered the mug in the hands of the bear. Heat set the sentiments out of the same stamp on some red cardstock and trimmed them down to small banners. Adhered the banners and finished off by adding some enamel dots.

Have a wonderful day!

Sunny Studio Supplies Used:

Joyful Holiday Paper Shop at: Sunny Studio

Holiday Hugs Stamps Shop at: Sunny Studio

Holiday Hugs Dies Shop at: Sunny Studio

Treat Bag Topper Die Shop at: Sunny Studio

Distinctive Door & Holiday Add-on Die Focused Card with Tina M

Hi, Crafty Friends! Tina M here! Today I have a cute and fun Holiday card to share with you, featuring the Distinctive Door Dies set, the Distinctive Door Holiday Add-on Dies set and the Wonderful Windows Dies set! These sets have so many options and cute details to choose from to create the most adorable cards!

I usually make my cards A2 size, but to fit all items I wanted to incorporate on this card I had to go up to a 6 x 6 inches card!

I started off with a red card base. Next, I trimmed a piece of turquoise paper from my stash to 5,75 x 5,75 inches, placed it inside the Woodgrain Embossing Folder,  and ran it through my die cutting machine to create a nice woodgrain texture for my house and adhered it to the card base, using double sided tape.  I then trimmed a piece of grey card stock to 1,5 x 5,75 for roof and adhered that to the top of the turquoise panel.

I die cut out the elements for my scene from the Distinctive Door Dies set, the Distinctive Door Holiday Add-on Dies set, and the Wonderful Windows Dies set from white card stock. Except for the light fixtures, the door handle, the pots for the decorative trees and the top stars where I used gold card stock. The snowy parts were die cut from white glitter paper. I die cut out the curtains from the turquoise floral-patterned paper from the Flirty Flowers Paper pack.

Next, I stamped the penguins from the Penguin Party Stamps set on alcohol ink friendly card stock using Memento Tuxedo black ink and colored them with my Copic Markers. See the list below. I then die cut the penguins out using the coordinating Penguin Party Dies.

Copic colors used:
Penguins: N3/5, R30, W0/1, R01, YR21/24
Santa´s hats/scarf: R22/24/27, C0/1
Gift box: E21/23 Ribbon/bow: R22/24
Glowing light: YR21/24

Using green and red ink I colored the trees, wreath, bows and berries. Using liquid glue, I assembled all the parts and created my scene! I tucked two of the penguins behind the curtains to peek out the windows!

I added foam dots to the back of the remaining two penguins and the potted trees and adhered them to the card. The greeting Hope your Holiday is fun & festive is from the Penguin Party Stamps set!

Thank you for stopping by today! Wishing you a happy and colorful day!

Sunny Studio Supplies Used:

Flirty Flowers 6x6 Paper Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Penguin Party Stamps Shop at: Sunny Studio	Penguin Party Dies Shop at: Sunny Studio	Wonderful Windows Dies Shop at: Sunny Studio
Distinctive Door Dies Shop at: Sunny Studio	Distinctive Door Holiday Add-on Shop at: Sunny Studio

Nativity Scene Builder Die Focused Card with Hanh

Hello Crafty Friends! It’s Hanh with you today and I have Christmas boxcard to share with you featuring the Nativity Scene Builder Dies Set. 

I used the Nativity Scene Builder Dies set to die cut all of the nativity scene elements out of white and yellow cardstock. For the boxcard, I trimmed a few pieces of white cardstock: one piece (4" x 4.25”), one piece (1.25" x 11”) and two pieces (1.25” x 5”). I also trimmed a few pieces of light blue cardstock: one piece (3.75” x 4”), one piece (3.75” x 1”) and two pieces of (1" x 1”). I used some Blueprint Distress Oxide ink to lightly ink up the edges of the large blue panel.

For the boxcard base, I used a score board to score the long white strip at the 1.25”, 5.25”, 6.5”, and 10.5” marks. I folded on the score lines, added liquid glue to the 0.5" end tab and secured it to the other end of the strip to create the boxcard base. 

I adhered the larger white and light blue panels to each other and then to the back of the boxcard base. I also adhered the smaller blue panels to the front and side panels of the boxcard. Next, I created the shelves by using the score board again to score the two white strips at the 0.5" on each of the long ends. I folded on the score lines and added the shelves to the boxcard with a strong double sided tape. 

For the sentiment, I stamped the “Joy to the world” sentiment from the Build-a-Greeting Holidays Stamp set with Versamark Watermark ink onto a piece of black cardstock and heat embossed with Detail White Embossing Powder. I used the long banner die from the Slimline Pennant Dies to die cut the strip out. I trimmed off the excess and adhered it to the front panel of the boxcard.

I decorated the boxcard with the nativity scene elements as shown in the pictures. I found it helpful to use clear acetate strips to help secure some the more delicate elements to the boxcard shelves.

I appreciate you taking the time to stop by and visit today. I hope you liked my boxcard. Be sure to check out the Sunny Studio Stamps Shop for more info and ideas. Please also visit my INSTAGRAM feed for more inspirations.

Have a wonderful and crafty day!

Sunny Studio Supplies Used:

Slimline Pennant Dies Shop at: Sunny Studio

Build-a-Greeting Holidays Shop at: Sunny Studio

Nativity Scene Builder Shop at: Sunny Studio

Winter Wreaths Card with Jarle

Hi friends! It's Jarle here, and I am excited to share my weekly project for Sunny Studio Stamps. This week, I used the beautiful Winter Wreaths stamp set. That detail on that wreath is just AMAZING! You have to check it out in the photos below. 

I started with a piece of teal cardstock (Teal Topaz from Spellbinders), 4 x 5.25 inches. I blended the edges with Distress Oxides in Peacock Feathers, Chipped Sapphire, and a little bit of Black Soot. I splattered some Copic White and set the panel aside to dry. 

After that, I stamped everything with the Winter Wreaths stamp set. I chose a green (with a hint of teal) for the wreath itself. I did the ribbon and poinsettias in shades of red ink. I die-cut everything with the coordinating dies. I also die-cut the 3 deer from the Rustic Winter die set with black cardstock (and a little bird from red cardstock). 

For the sentiment, I went with my trusty Build A Greeting Holidays stamp set. I gold embossed 'wishing you a beautiful season' on a strip of red cardstock. I love this stamp set because you can make SO MANY different sentiments with it. I also really like its simple style. 

I popped up the Winter Wreath on the ink-blended panel and added the ribbon with foam squares and the poinsettias with liquid glue. The deer and the sentiment are also popped up. To add a little bit of extra something, I adhered a few jewels from the Gold Jewels and the Magic Rainbow Jewels. I glued down my whole panel on an A2-sized red card base. 

I think the wreath really stands out on this card. The pops of green and red on a darker ink-blended cardstock are gorgeous. Have a beautiful day! 

Sunny Studio Supplies Used:

Rustic Winter Dies Shop at: Sunny Studio

Winter Wreaths Stamps Shop at: Sunny Studio

Winter Wreaths Dies Shop at: Sunny Studio

Build-a-Greeting Holidays Shop at: Sunny Studio

Holiday Tags & Labels Gift Tags with Janneke

Hello crafty friends, Janneke here. Today I’m sharing autumn squirrel gift tags. I decided to give the Holiday Tags & Labels stamp a different look and create autumn tags.

I started by die cutting the Scalloped Tag Square from gold glitter cardstock to create the base for each tag. Next, I used the Holiday Tags & Labels Stamp Set to stamp the circles in beautiful autumn colors: green, orange and yellow. I stamped each color onto cardstock in the same color family, but one shade lighter than the ink.

I die cut the stamped circles using the coordinating dies and also die cut the little squares from the same set. For an extra playful touch, I die cut the little bows from the Sleigh Ride Surprise Die Set, again using the same green, orange and yellow color palette.

Then came my favorite part: assembling everything! I adhered all the pieces onto the golden scalloped tags, mixing and matching the colors so that every tag has its own little combination.

Of course, these tags needed some adorable characters, so I stamped and colored the squirrels from the Squirrel Friends Stamp Set. Once they were colored, I added them to the tags, and they really brought the whole autumn theme to life.

For the sentiment, I chose the “Thanks” stamp from the Sweet As Can Bee Stamp Set. And finally, I added coordinating pieces of colored ribbon to finish off each tag.

Thanks for joining me, and see you next week.

Sunny Studio Supplies Used:

Scalloped Tags-Square Shop at: Sunny Studio	Squirrel Friends Stamps Shop at: Sunny Studio	Squirrel Friends Dies Shop at: Sunny Studio	Sweet As Can Bee Stamps Shop at: Sunny Studio
Holiday Tags & Labels Stamps Shop at: Sunny Studio	Holiday Tags & Labels Dies Shop at: Sunny Studio	Sleigh Ride Surprise Shop at: Sunny Studio

Holiday Style Card with Yan

Hey crafty friends! It's Yan here, and today I'm sharing a super cheerful Christmas card that is packed with holiday magic! This project was so much fun to make, and I'd love to share my process with you. Let's craft together!  

​To kick things off, I stamped the adorable penguin and Santa hat from the Penguin Pair Stamps onto Neenah Solar White cardstock using Memento Tuxedo Black Ink. Coloring is always my favorite part! I brought them to life using Copic markers before die-cutting them flawlessly with the matching dies.  

COPIC COLORS:
Penguin: E30, E31, E41, R30, W1, W5, W7, Y02, Y15
Santa Hat: R32, R43, R46, W1

​Next, I wanted a soft, dreamy look for the ornaments. On another piece of white cardstock, I stamped a cluster of Christmas balls from the Holiday Style Stamps set using soft pink, pale yellow, and light blue inks. Then, I die-cut every single ornament cleanly with the coordinating dies.  

For the cozy background, I trimmed a piece of classic red gingham paper from the Joyful Holiday 6x6 Paper Pad. I love how that pattern instantly adds a warm holiday feel!  

​For the sentiment, I die-cut a label frame from white cardstock using the Loopy Rectangle Frame Dies. I stamped the "Believe in the magic of Christmas" text in black, adding pine branches and berries from the Holiday Greetings Stamps set around it for a sweet framed effect.  

​Finally, I assembled everything together! I popped the penguin and pastel ornaments onto the card using foam tape. I love using foam tape to build fun dimension—it makes the whole scene feel like the penguin is joyfully tossing ornaments into the air!  

And there you have it—a bright, whimsical card guaranteed to bring a big smile. Happy crafting, everyone! 

Sunny Studio Supplies Used:

Holiday Style Dies Shop at: Sunny Studio	Holiday Style Stamps Shop at: Sunny Studio	Holiday Greetings Stamps Shop at: Sunny Studio	Joyful Holiday Paper Shop at: Sunny Studio
Penguin Pair Stamps Shop at: Sunny Studio	Penguin Pair Dies Shop at: Sunny Studio	Loopy Rectangle Frame Dies Shop at: Sunny Studio