Plane Awesome Card with Marine

Hello crafty friends, Marine here, I'm super happy to be back with this 4th of July themed shaker card featuring a mix and match of images from multiple stamp sets. I may not be an American citizen, but 4th of July cards have always been extra fun to create because you don't get to use this red, white and blue color palette on many cards.

So, as very often, I started off by stamping the images on 110 Neenah solar white cardstock using an alcohol marker friendly black ink, I used the matching dies to cut them all, and colored everything using my Ohuhu markers. And as always, here is a detailed list of the stamp sets I used: • Plane Awesome - plane, banner, clouds, pilot • Spring Showers - kids • Truckloads Of Love - flags • Bunnyville - tulips, grass • Scenic Route - houses • Spring Scenes - trees.

When the coloring was done, I added highlights and details to the images using a white gel pen. Next, I cut a 5,5 x 4,25 inches panel out of a Surprise Party starry blue paper, I darkened the edges using chipped sapphire distress ink, mixed some of that same ink with water and used a slim brush to add splatters to the panel, mostly on the edges, and then I did the same with copic opaque white ink.

While my starry blue panel was drying, I cut a 5,5 x 4,25 inches Strathmore bristol smooth panel, and created a very simple sky all over it using a cloudy stencil from my stash along with tumbled glass and salty ocean oxide inks. I splattered water on the panel, dried it with a paper towel, mixed some salty ocean oxide ink, prize ribbon oxide ink and candied apple oxide ink with water and used my slim brush again to add blue and red splatters to my cloudy background. I added white splatters as well, and once my panel was dry, I attached the Scenic Route houses at the bottom using liquid glue.

Once my starry blue panel was dry, I cut a large opening out of it using the second largest Rounded Rectangle Window die, leaving me with a starry blue frame. I attached this frame to a piece of acetate using liquid glue, I flipped my panel over and added foam strips all along the rounded window and along the very edges of my panel as well, I poured some Americana confetti on the acetate, peeled the backing papers off the foam strips, and then attached my cloudy panel to those strips to totally close my shaker panel.

I white heat embossed "Let your dreams soar" from Plane Awesome on the banner, and finally attached all the images to my card using 1mm and 2mm foam squares. 

And that's it! I hope that you like this new mix & match, it was really fun to put this little scene together. Thanks so much for stopping by, and see you next week with a trio of 4th of July tags! 

Sunny Studio Supplies Used:

Plane Awesome Stamps Shop at: Sunny Studio	Plane Awesome Dies Shop at: Sunny Studio	Scenic Route Stamps Shop at: Sunny Studio	Scenic Route Dies Shop at: Sunny Studio
Spring Scenes Stamps Shop at: Sunny Studio	Spring Scenes Dies Shop at: Sunny Studio	Spring Showers Stamps Shop at: Sunny Studio	Spring Showers Dies Shop at: Sunny Studio
Bunnyville Stamps Shop at: Sunny Studio	Bunnyville Dies Shop at: Sunny Studio	Truckloads of Love Stamps Shop at: Sunny Studio	Truckloads of Love Dies Shop at: Sunny Studio
Rounded Rectangle Window Dies Shop at: Sunny Studio	Surprise Party 6x6 Paper Shop at: Sunny Studio

Rounded Rectangle Window Die Focused Card with Marine

Hello crafty friends, Marine here, I'm back with this lovely Valentine winter shaker card showcasing the Rounded Rectangle Windows die set. If you're a fan of shaker cards like me, you will love the different sizes of dies and all the possibilities to create multiple styles of shakers! I personally look forward to using this die set again on other projects! I'm using one of my favorite stamp sets from the Fall & Winter 2024 release, Snowmen In Sweaters, and since Valentine's Day happens during the winter season, I thought it would be fun to mix those two themes and create a super cute and fun card.

I started off by stamping the images on 110lb Neenah solar white cardstock using an alcohol marker friendly black ink. As always I cut them all using the matching dies, and colored everything using my Ohuhu markers. Here is a detailed list of the stamp sets I used: • Snowmen In Sweaters - snowmen, trees, snowflakes • Scenic Route - houses, lights • Bighearted Bears - envelopes.

I cut two large Rounded Rectangle Mat panels out of Strathmore bristol smooth cardstock and created the same landscape on both panels: a snowy border using tumbled glass and peacock feathers oxide inks, and the sky using spun sugar, worn lipstick and festive berries oxide inks.

Once they both were dry, I set one panel aside for later, and cut three Rounded Rectangle Windows out of the second panel using the third smallest die from the set, and stamped my "Love you snow much" greeting from Bighearted Bears and Feeling Frosty right below the windows. At the back of my window panel, I attached a piece of acetate using liquid glue, and added foam strips on the four edges of the panel and all around the windows as well. I poured crystal stones and red heart confetti inside each window, attached the houses on the first panel using liquid glue, and stuck that panel to the foam strips to totally close my shaker panel.

I attached my Rounded Rectangle Mat shaker panel to a 5,5 x 4,25 inches white card base, and stuck the images using 1mm and 2mm foam squares. I added a dot of glossy accents to each light, white blizzard nuvo drops to the snow on the trees, and finally highlights and details to the images using a white gel pen. 

And that's it! Thanks so much for stopping by, and see you next week!

Sunny Studio Supplies Used:

Feeling Frosty Stamps Shop at: Sunny Studio	Scenic Route Stamps Shop at: Sunny Studio	Scenic Route Dies Shop at: Sunny Studio	Bighearted Bears Stamps Shop at: Sunny Studio	Bighearted Bears Dies Shop at: Sunny Studio
Snowmen in Sweaters Stamps Shop at: Sunny Studio	Snowmen in Sweaters Dies Shop at: Sunny Studio	Rounded Rectangle Mat Dies Shop at: Sunny Studio	Rounded Rectangle Window Dies Shop at: Sunny Studio

Penguin Party Card by Amanda

Hello there, Sunny Studio Stamps fans! It’s Amanda Fitterer here with you on the Blog today! I get to share this super adorable slimline card I made! I don’t make slimline cards often, but when you’re trying to fit as many cute penguins in one scene, you just HAVE to, right?! Keep reading to see how I put this card together!

To create this card, I’m going to trim down a piece of white cardstock to slimline size (3.5”x8.5”). For my background, I am going to use the Scenic Route Stamps. I love how many different ways you can use this one stamp set! 

I’m using these stamps to create 3 little “scenes”. I’m going to use the Christmas light strands at the top and the little houses under that for one scene. At the bottom, I am going to use the hills & trees image. For the bottom scene, I am using the left side of the stamp and for the middle scene, I’m using the right side.

Once I’ve stamped my scenes, I’m ready to lay out my penguins from the Penguin Party Stamps. After figuring out which penguin will go where, I can stamp each one out with its little accessories!

Now that everything is stamped, I can use my Copic markers to color all the images. Once the penguins are finished, I can cut them out using the Penguin Party Dies. I am using 3D foam squares to prop up each of the penguins and adhere them to the card front.

The final step is to add my sentiments. I am using black cardstock and white embossing powder to make the sentiments pop! The sentiments are all from the Penguin Party Stamps. First, I’m going to stamp them onto black cardstock with my WOW! Embossing Pad. Then, I’m going to apply Super Fine White Embossing  Powder and use my heat tool to melt the powder. I’m using my trimmer to trim each sentiment into strips. I’m using 3D foam strips to prop the sentiments up and adhere them to the card front.

Finally, I can glue my card front to a slimline card base and I’m all ready to send it to someone special this Holiday season!

Thanks for stopping by the Sunny Studio Stamps Blog today! I hope you’ve enjoyed this post! I also hope you find some time to get crafty today! See you next time!

Sunny Studio Supplies Used:

Scenic Route Stamps Shop at: Sunny Studio

Scenic Route Dies Shop at: Sunny Studio

Penguin Party Stamps Shop at: Sunny Studio

Penguin Party Dies Shop at: Sunny Studio

Brilliant Banner 3 Die Focused Card with Marine

Hello crafty friends, Marine here, I'm back with this cute holiday card featuring Santa, Rudolph and his reindeer friends. They're busy delivering presents to everyone who's been nice this year, and for the first time, Santa's sleigh stays in the garage, and the little gang is travelling the world in a Christmas van. How fun!

I started off by stamping all the images on 110lb Neenah solar white cardstock using an alcohol marker friendly black ink. I cut them all using the coordinating dies, and colored everything using my Ohuhu markers and my Graph'it brush markers in my favorite holiday color palette, which is red, pink, aqua and green.

Here is a detailed list of the stamp sets I used: • Beach Bus - van • Lazy Christmas - presents • Snowmen In Sweaters - trees, snowflakes • Holiday Express - Rudolph • Fall Friends - reindeers • North Pole - Santa, nice list • Panda Party - banner • Scenic Route - houses • Winter Scenes - trees.

I set my images aside, and cut a 5,5 x 4,25 inches Strathmore bristol smooth panel that I divided in two sections using washi tape: the sky at the top, and snow at the bottom. I colored the sky using kitsch flamingo and picked raspberry oxide inks, and the snow using salvaged patina and peacock feathers oxide inks. As always I added lots of textures to my panel, starting with water droplets on the sky. I also mixed some picked raspberry oxide ink with water, and added more splatters to the sky. I mixed some peacock feathers oxide ink with water, and added splatters to the snow section. Next I mixed some copic opaque white ink with water and added splatters all over the panel, and then I did the same with liquid stardust.

Once my panel was dry, I attached all the images on my panel using 1mm and 2mm foam squares, added highlights and details using a white gelly roll pen, and then moved on to my greeting that I created using Brilliant Banner 3 dies. I cut the two main pieces out of light pink cardstock, and white heat embossed "You're on my nice list" from North Pole on the front piece. I layered both pieces on top of each other using 1mm foam squares, and for an extra shiny detail, I cut another banner out of holographic cardstock, stuck it behind my pink banner using liquid glue, and finally attached the completed banner in the top part of my panel using foam squares again.

And that's it! Thanks so much for stopping by, and see you next week!

Sunny Studio Supplies Used:

Fall Friends Stamps Shop at: Sunny Studio	Fall Friends Dies Shop at: Sunny Studio	Holiday Express Stamps Shop at: Sunny Studio	Holiday Express Dies Shop at: Sunny Studio	Lazy Christmas Stamps Shop at: Sunny Studio
Lazy Christmas Dies Shop at: Sunny Studio	Scenic Route Stamps Shop at: Sunny Studio	Scenic Route Dies Shop at: Sunny Studio	North Pole Stamps Shop at: Sunny Studio
North Pole Dies Shop at: Sunny Studio	Winter Scenes Stamps Shop at: Sunny Studio	Winter Scenes Dies Shop at: Sunny Studio	Panda Party Stamps Shop at: Sunny Studio
Panda Party Dies Shop at: Sunny Studio	Beach Bus Stamps Shop at: Sunny Studio	Beach Bus Dies Shop at: Sunny Studio	Snowmen in Sweaters Stamps Shop at: Sunny Studio
Snowmen in Sweaters Dies Shop at: Sunny Studio	Brilliant Banner 3 Dies Shop at: Sunny Studio