Season's Greetings Cards with Franci and Ana

Hello there! Franci here with you today with a couple of tiny Christmas tags showcasing the Season's Greetings set.

First of all I die-cut multiple times the little Scalloped Tags Circle dies out of some white cardstock and this pretty dotted patterned paper from the Subtle Grey Tones Paper pad.  Then I also die-cut 2 little tags using a mini die included in the Sweet Treat Bag die set and stamped them with the "to: & love:" from the Season's Greetings set.

Then I stamped and die cut some pine branches and berries and I glued them down to my patterned paper tags with foam adhesive. I used these Memento drops inks to stamp and shade them: Pearl Tart, Bamboo Leaves, Lady Bug and Rich Cocoa.

I glued the white tags on the back of my decorated ones added the little tags at the tops and added some sparkle red twine. Finally I added lots of sparkle to the berries with my Wink of Stella clear brush. 

These tags are so super easy to make you could easily create a ton if you need a lots for the Holidays! Hope you like them and thanks a lot for stopping by! 

-------------------------------------------------------------

Hello everyone! Ana here today with a pink Christmas card featuring Season’s Greeting stamp set and Snowflake Circle Frame die.

I started with creating the background by die cutting a piece of Bristol paper with Frilly Frames Lattice outline die. I masked the scallops and blended Worn Lipstick distress oxide ink on the panel. Once the panel was dry I white heat embossed the part of my sentiment - seasons. While I had the embossing powder and sticky ink still out, I embossed the word greetings to a piece of vellum and fussy cut it out.

Out of white cardstock, I die cut several pieces of circles with Snowflake Circle frame die, arranging them to the background and adhering with liquid glue. Next, I adhered the vellum sentiment piece to the background with thin strips of foam tape.

I stamped and die cut the branches and berries (from Season’s Greetings set), adhered them to the background then added white splatter which I created by mixing white acrylic paint and water. I added a pink panel to the back of my background separating them with craft foam and adhered them to the card base.

Thank you so much or stopping by today – I really hope you got inspired! Until next week – Happy Crafting!

Sunny Studio Supplies Used:

Frilly Frames Lattice Dies Shop at: Sunny Studio	Subtle Grey Tones Paper Shop at: Sunny Studio	Season's Greetings Stamps Shop at: Sunny Studio	Season's Greetings Dies Shop at: Sunny Studio	Snowflake Circle Frame Shop at: Sunny Studio
Scalloped Tags-Circle Shop at: Sunny Studio	Sweet Treats Gift Bag Shop at: Sunny Studio

Santa Claus Lane Cards with Juliana and Angelica

Hello Sunny Studio Friends! It's Juliana here to share a festive Christmas shaker card featuring the Santa Claus Lane Stamp Set.

I began by stamping and coloring some of the images from the Santa Claus Lane Stamp Set with Copic Markers. I then die cut them with the Santa Claus Lane Dies.

Next, I took the Layered Snowflake Frame Dies and die cut the large snowflake frame from white cardstock and trimmed it into a square. I then die cut the small snowflake frame from white cardstock and trimmed it the same size as the larger frame.

To create the shaker box, I adhered a piece of transparency film/acetate to the back side of the large frame. I then added thin strips of double sided foam tape to create the frame that will hold the sequins and beads.

For the backing of the shaker box, I cut a piece of white cardstock to just slightly larger than the frame and inked it with Distress Oxide in Blueprint Sketch and Chipped Sapphire. I then lightly spritzed it with some water to activate the ink and dabbed it dry revealing “snowflakes”.  Next, I adhered the small white snowflake frame to the center of this piece to finish off the backing. I then adhered Santa in his sleigh with the toys! To fill the shaker I used a mix of seed beads, sequins and Blue Snowflake Confetti. I usually carefully pour these on top of the image just to get a feel for how much to add.

I then carefully lined up the top of the shaker with the backing and adhered the layers together to complete the shaker card. To finish it all off, I added the sentiment, heat embossed with white embossing powder, onto a red die cut pennant from the Fancy Frames Rectangle Dies.

Thanks so much for stopping by today! I hope you enjoyed learning how to create a festive Christmas shaker card featuring the Santa Claus Lane Stamp Set.

---------------------------------------------------

Hi friends! Angelica here, I have a new Christmas card to share with you today, featuring the Santa Claus Lane stamp set. 

I stamped and Copic-colored images from the stamp set, then die-cut them with the coordinating dies. I die-cut white card stock with Happy word die three times, stacking and gluing the words together for height. For the background, I blended Blueberry and Blue Corn inks onto a panel of white card stock. I let the ink dry, then white heat-embossed the sentiment words at an angle. 

I splattered shimmer water and watered-down white acrylic paint onto the panel for snow, then trimmed the panel with the Frilly Frames Retro Petals stitched rectangle. I attached the panel to a card base with foam adhesive, and added the chimney, Santa’s sleigh, and die cut word. I finished the card by applying shimmer and shine to the word, using a shimmer brush and Crystal glaze.

I hope I have helped with ideas for the fun Santa Clause Lane Lane stamp set. Thanks so much for stopping by! 

Sunny Studio Supplies Used:

Fancy Frames- Rectangles Shop at: Sunny Studio	Happy Word Die Shop at: Sunny Studio	Frilly Frames Retro Petals Dies Shop at: Sunny Studio	Santa Claus Lane Stamps Shop at: Sunny Studio	Santa Claus Lane Dies Shop at: Sunny Studio
Layered Snowflake Frame Shop at: Sunny Studio

Layered Poinsettia Cards with Eloise and Leanne

Hi friends, Eloise here and today I’m using the Layered Poinsettia’s Die Set to create some Christmas Tags. I used the Scalloped Tag Circle Dies for the base and also used the Woodgrain Embossing Folder for some added texture and the Merry Mice Stamp Set for the sentiment.

I started off with die cutting out all my layers of the poinsettia die from different shades of cardstock. I then layered them together and adhered them. While I was die cutting, I also cut out three Scalloped Circle Tags from white cardstock and also grey cardstock and then ran the white ones through with the Woodgrain Embossing Folder.

Next I cut down the grey pieces a little to create a diagonal look, added foam tape onto the bottom and adhered them onto my white tags at the bottom. I then adhered the poinsettia’s with foam tape too. For the sentiment I used the Merry Mice Stamp Set, curved the ‘Merry Christmas’ in my MISTI and stamped it with black ink onto the bases of the tags. Lastly, I tied two types of twine through the tops of each of the tags.

Thanks so much for stopping by today, I hope you enjoyed these tags and I’ll see you next week.

--------------------------------------------------

Hi crafty friends, Leanne here! I have another card to share that features the Layered Poinsettia. If you recall, my card from last week combined the poinsettia and buffalo plaid. I really loved that look so I have used that combination again for this week. I've used a very traditional color palette with some glittery accents for a more elegant design.

I started with an A2 sized card base. I cut a panel of white card stock about a quarter inch smaller than A2 dimensions. I added some black paint splatters then layered it on top of some black glitter card stock with foam tape. I created a red and black plaid strip using a stamp from the Background Basics set. I adhered this strip towards the left side. I stamped out some pine boughs from the Christmas Trimmings set. I created the Layered Poinsettia using dark green card stock for the bottom layer and white for all the petals. I used a light green ink pad with a sponge dubber to add shading to the larger petal edges and completely color the tiny petals. 

Before adhering the pine boughs and poinsettia, I heat embossed the greeting in silver. The Merry Christmas greeting also comes from the Christmas Trimming set. To finish off the card, I frosted the poinsettia petals with Nuvo White Blizzard Glitter Drops and scattered a few dots of Nuvo Sliver Crystals Glitter Drops. 

Sunny Studio Supplies Used:

Background Basics Stamps Shop at: Sunny Studio	Christmas Trimmings Stamps Shop at: Sunny Studio	Christmas Trimmings Dies Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio
Layered Poinsettia Dies Shop at: Sunny Studio	Scalloped Tags-Circle Shop at: Sunny Studio

Guest Designer Spotlight: Winter Themed Cards with Mona Toth

Hi crafty friends! It's Mona Toth here and I am super excited for be a guest on the Sunny Studio Blog! I have two cards for today what I made with the Merry Mice, Scenic Route and Cruising Critters stamp sets.

For my first card I started the cardmaking with stamping and coloring. I stamped the images from the Merry Mice and the Scenic Route stamp sets then I colored them with Copic Markers. After the coloring I die-cut the images with coordinating dies and added highlights with Signo Uniball white pen.

For the background added Frilly Frames Chevron Dies with Neenah Solar White cardstock then I cut a little smaller cardstock made ink blending on it with Spun Sugar and Tattered Rose Distress Oxide Ink. After the ink blending I stamped the "Merry Christmouse" sentiments with clear watermark ink and made a quick heat embossing on it.

To the background I added a beautiful red cardstock from Striped Silly 6x6 Paper Pad behind the background die-cut. In the end I styled my card and adhered everything together.

For my second card I made almost the same process, but this time I have used the Cruising Critters stamp set together with the Scenic Route set. I colored them with Copic markers as well.

For the background I die-cut the Layered Snowflake Frame Die from a cream cardstock and created with it this sweet but festive scene.

In the end I run the "Winter Wishes" sentiment through my die-cut machine with red cardstock, adhered to my card and it was ready. 

Thank you very much for reading through my post, I hope that you have enjoyed it, feel free to comment which one you like more. Feel free to check my Instagram for more inspiration. :)

Have an amazing day, big hugs, Mona!

Sunny Studio Supplies Used:

Striped Silly 6x6 Paper Shop at: Sunny Studio	Frilly Frames Chevron Die Shop at: Sunny Studio	Cruising Critters Stamps Shop at: Sunny Studio	Cruising Critters Dies Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio
Merry Mice Dies Shop at: Sunny Studio	Scenic Route Stamps Shop at: Sunny Studio	Scenic Route Dies Shop at: Sunny Studio	Layered Snowflake Frame Shop at: Sunny Studio

Merry Mice Cards with Rachel and Candice

Hello everyone! It's Rachel here and I have a winter slimline card to share with you today that focuses on the Merry Mice Stamp Set. To start my card, I first stamped all of my images onto a sheet of Neenah Solar White 110lb Card Stock with some Memento Tuxedo Black Ink. I then used Copic Markers to color everything and the coordinating dies to cut them out.

Copic Colors Used:

• Light Teal: BG10, BG15
• Dark Teal: BG11, BG13, BG49
• Light Ears: RV0000, RV11
• Dark Pink Ears: RV0000, R81, R85
• Grays: W0, W2, W4, W5
• Whites: 0, C00, C2, C4
• Reds: R35, R37, R59
• Browns: E40, E41, E42, E44

For my background, I trimmed a piece of smooth white card stock to 8.5" x 3.5" and then blended it with some Peacock Feathers. Evergreen Bough, and Tumbled Glass Distress Oxide Inks. I splattered this piece with some water and then lightly blotted it dry with a paper towel. I then splattered it with both diluted white and green paints. 

For some added interest, I stamped some trees from the Santa Claus Lane Set with Galactic Stream, Teal Cave, and Aqualicious Inks from Altenew. I used the Woodland Borders Die Set to add a stitched snow drift. Lastly, I adhered all of my images with some 3D Foam Adhesive Squares for added dimension.

I hope you enjoyed my card today! Wishing you all a safe and wonderful weekend!

--------------------------------------------------

Welcome back this fantastic Friday! Candice with you today sharing a sweet Christmouse scene with you today using the adorable Merry Mice stamp set!

I began my card by creating an 8 1/2 x 3 1/2 card base that fits perfectly into a standard or size 9A envelope. For the background, I first heat embossed the snow in white using the Frosty Flurries stamp set and lightly inked with squeezed lemonade and twisted citron.

I then die cut three snowhills from the Woodland Borders dies, two of them at an angle to get the dip in the center of my card. Next, I stamped all the adorable mice, trees, presents, and accessories from the Merry Mice stamp set, colored with Copic markers, and die cut out using the Merry Mice coordinating dies.

To finish the card, I heat embossed the sentiment in white and inked over with milled lavender and trimmed into a long banner. Thank you for visiting today!

Sunny Studio Supplies Used:

Frosty Flurries Stamps Shop at: Sunny Studio	Woodland Borders Dies Shop at: Sunny Studio	Santa Claus Lane Stamps Shop at: Sunny Studio	Santa Claus Lane Dies Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio
Merry Mice Dies Shop at: Sunny Studio