Embossing Folder Focused Cards with Leanne and Eloise

Hello everyone, Leanne here! Have you started decorating for the holidays yet? I just love the Farmhouse style of decorating especially for Christmas. It was this decorating trend that inspired my card today. Most of the Farmhouse Christmas decor ideas I've seen include buffalo plaid, so for my card I created a green and black plaid background using the Buffalo Plaid Embossing Folder. 

To achieve the green and black plaid, I started with green card stock and then I used Onyx Black VersaFine to ink up the embossing folder before running it through my die cut machine. I added the embossed plaid panel to an A2 sized card base. I die cut one of the Fancy Frames Rectangles to place in the center of the plaid background.

The Farmhouse decorating style is known for it's simplicity so I followed suit and kept this card design fairly clean and simple. I die cut the "Merry Christmas", using the Christmas Garland Frame Dies, from black glitter card stock and adhered to the frame at an angle. I then used the Layered Poinsettia dies to create a single flower to add just below the greeting. For a little bit of embellishment, I added a few clear sequins to finish off the card. 

------------------------------------------------

Hi friends, Eloise here and today I’ll be using the Woodgrain Embossing Folder along with Merry Mice to create a Christmas card.

I started off with stamping out my images and colouring them in with Copic Markers. I cut them out and then added white details using a gel pen.

(Copic Markers Used: B0000, B000 / YG03, YG23, YG25, YG17 / R000, R00 / R32, R35, R37, R39 / YR20, YR21, YR23, YR24 / W00, W0, W1, W3 / E50, E51, E53, E55 / E30, E31, E34, E35 / RV91, RV93, RV95, RV99 / RV63, RV66, RV69, R89 / 0)

I then took a piece of watercolour cardstock and ran that through my die cutting machine with the Woodgrain Embossing Folder. I then water-coloured a pink/purple circle into the centre.

Lastly, I adhered my images into place and white heat embossed the ‘Have A Mice Christmas’ sentiment onto a thin strip of black cardstock and adhered that on too.

Thanks so much for stopping by today and I’ll see you all next week. 

All retail purchases of any size will have 10% donated to Convoy of Hope to help with children’s feeding initiatives and disaster response.

And as always orders will also come with our mini holiday light bulb die (not pictured).

Sunny Studio Supplies Used:

Fancy Frames- Rectangles Shop at: Sunny Studio	Buffalo Plaid Embossing Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio	Merry Mice Dies Shop at: Sunny Studio
Layered Poinsettia Dies Shop at: Sunny Studio	Christmas Garland Frame Shop at: Sunny Studio

Hedgey Holiday Cards with Ana and Franci

Hello crafties! It’s Ana here today sharing a card and a tag using super adorable Hedgey Holidays stamp set as well as few other of my favorite products from Sunny Studio!

I stamped the hedgey three times, holly images twice, colored them with alcohol markers and cut them with coordinating dies. Presents and part of the sentiment are from Alpaca Holiday stamp set.

I used a snowy scene page from Very Merry 6x6 paper pack to create a background for both my card and tag, as well as red and green patterned papers from the same paper pack, for the card frame and tag topper. I cut an extra tag out of white cardstock and topper out of green patterned paper for the back side of the tag. For the card frame I used largest inside and outside Fancy Frames Square Dies and for the tag Build-A-Tag #2 Dies.

I assembled the card and tag adding snow pen to each below the hedgehogs and presents for some texture. Finally, I stamped the sentiment on the card background and To and From on the back of the tag with VersaFine Onyx Black ink and my projects were finished!

Thank you so much for stopping by today! I hope you’re enjoying all the hedgey cuteness we are sharing with you this week!

-----------------------------------------------

Hello crafty friends! Franci here with you today and I'm super happy to share a project featuring the mini Hedgey Holidays set!!

Aww this little festive critter is sooo adorable!! First of all I created a card base out of white cardstock and I cut out a white matching panel. I added some sparkle watercolor splatters on it, let everything dry completely and stamped my sentiment in the bottom right corner.

As everything was dry I added the wood detail using the Woodgrain Embossing folder and die cut the Christmas word out of some sparkle glittered gold cardstock using a die from the Christmas Garland Frame die. I stamped, colored and die cut all the images (I also added some holly and little hearts from the Santa Claus Lane set and the Hogs & Kisses one) and I added some details with a white gel pen. 

I arranged all my critters and all the other elements on to the panel that I previously glued down to my card with some liquid glue (or you can use strong double sided adhesive) to give the idea of a little Christmas tree shape and the card is complete!

Awww I love this so much, hope you like it too! 

All retail purchases of any size will have 10% donated to Convoy of Hope to help with children’s feeding initiatives and disaster response.  

And as always orders will also come with our mini holiday light bulb die (not pictured).

Sunny Studio Supplies Used:

Fancy Frames-Square Dies Shop at: Sunny Studio	Alpaca Holiday Stamps Shop at: Sunny Studio	Alpaca Holiday Dies Shop at: Sunny Studio	Build-A-Tag #2 Dies Shop at: Sunny Studio	Very Merry 6x6 Paper Shop at: Sunny Studio
Woodgrain Embossing Shop at: Sunny Studio	Santa Claus Lane Stamps Shop at: Sunny Studio	Santa Claus Lane Dies Shop at: Sunny Studio	Hogs & Kisses Stamps Shop at: Sunny Studio
Hogs & Kisses Dies Shop at: Sunny Studio	Christmas Garland Frame Shop at: Sunny Studio

Layered Poinsettias Cards with Rachel and Candice

Hello friends! It's Rachel here and I have a card to share with you today that features the new Layered Poinsettia Die Set. To start my card, I first created my poinsettia by cutting the various layers in different shades of red card stock. I also cut one layer of leaves from green card stock. In order to get the illusion of added depth, I blended each piece lightly on the edges with some Distress Ink that was slightly darker than the card stock itself.

Also, I used small pieces of 3D Adhesive Foam Squares when adding each layer to also add some more dimension. If you preferred less dimension, you'd simply need to glue your layers together. Once my flower was assembled, I set it aside and worked on my card background. Since I loved the look of the Woodgrain Embossing Folder on my previous card, I used the same technique on this card. I added some brown ink to the front panel of my embossing folder and ran a piece of 4.25"x4.25" Kraft card stock through my machine. I then layered this woodgrain piece with both a square white and green piece of card stock.

For some added interest, I die cut another piece of green card stock with the Snowflake Circle Frame Die and added this to the center of my card. I then used this set to also cut some white snowflakes as accents. For my sentiment, I used the "Wishes" word die from the Layered Snowflake Frame Die and die cut my sentiment from white card stock. I glued this piece to the front of my card and added the word "Christmas" (from the Merry Mice Stamps Set) by heat embossing it with Fine Detail White Embossing Powder onto a strip of black card stock. Lastly, I added a few small White Pearls to the centers of my snowflakes and poinsettia.

I hope you've enjoyed my card today! Wishing you all a lovely weekend!

-------------------------------------------------------

Welcome back my crafty friends, it's Candice with you again this Friday sharing an elegant Christmas card for you today using the new Layered Poinsettia dies! 

The fabulous Sunny Studio Stamps products I used are:

• Layered Poinsettia dies
• Layered Snowflake Frame die (winter wishes)
• Santa Claus Lane stamp set (sentiment)
• Frilly Frames Stripes die (background)
• White Pearls

I began my card by creating an 8 1/2 x 3 1/2 card base which will fit nicely into the size 9A envelopes.

To create my background, I die cut strips from shimmer paper with the Frilly Frames Stripes die and using the negative for a guide, glued them to a piece of cardstock that I trimmed to fit on the front.

Next, I die cut the poinsettia leaves from the same shimmer paper. I then cut out three sets of the poinsettia petals, inking each layer with chipped sapphire, then faded jeans and topped with stormy sky.  

For my large sentiment, I die cut the winter wishes from silver and multiples from scrap white cardstock and layered. I then heat embossed the sentiment in silver and trimmed to create a banner. For a simple embellishment, I added a few white pearls.

Thank you so much for visiting!

Sunny Studio Supplies Used:

Frilly Frames Stripes Die Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Santa Claus Lane Stamps Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio	Layered Poinsettia Dies Shop at: Sunny Studio
Layered Snowflake Frame Shop at: Sunny Studio	Snowflake Circle Frame Shop at: Sunny Studio

Sweet Treat Focused Cards with Angelica and Juliana

Hi friends! Angelica here, with a fun project using the Sweet Treat Bag Dies. 

I used stamps from the Season's Greetings stamp set to decorate two pieces of kraft card stock. Once I finished stamping, I used the Sweet Treat Bag die to die-cut both pieces. I watched this video from Sunny Studio Stamps to help me assemble the bag.

I decorated the flap top with Holiday Cheer and Classic Gingham pattern papers, die-cutting them with the Sweater Vest Dies. I glued the die cuts onto a white die-cut flap, then attached the flap to the bag. I used small Basic Grey magnets to close the bag.

I love how easy this bag was to put together. I'll be making a lot more of these soon for the upcoming Christmas season. That's all that I have for today. Thanks for stopping by!

------------------------------------------------------

Hello Sunny Studio Friends! It's Juliana here and today I've created a Christmas gift bag using the Sweet Treat Bag Dies. I combined it with some other dies and an embossing folder to create a sweet little rustic woodland style.

I began by taking the Sweet Treat Bag Dies and cutting the main shape twice from kraft cardstock. I then used the Woodgrain Embossing Folder to emboss each piece of the bag. I then assembled the bag following the instructions in this video.

Next, I took the Scalloped Tag Square Dies and cut the larger tag from white cardstock. I then took Therm O Web Purple Tape and placed it along the stitched lines to mask off the edges of the tag. I then  used Distress Oxide Inks to create a snowy sky. I then splattered it with watered down white acrylic paint to give the look of snowflakes.

To create the rustic winter scene, I used the Rustic Winter Dies and Woodland Border Dies. I cut the deer from brown cardstock and the trees from green. I then inked the edges to add a little interest. I also die cut a piece of white cardstock using the border dies to create a snowy hill for the deer. Once all the pieces were created, I adhered them to the tag. I then finished it off with a red bow and added matching handles to the bag.

Since this is a gift bag, I used the tiny tag die that comes with the Sweet Treat Bag Dies to create a to/from tag for the bag. I stamped the to and from using the Season's Greetings Stamp Set.

Thanks so much for stopping by today! I hope you enjoyed learning how I created this rustic woodland style Christmas gift bag using the Sweet Treat Bag Dies.

Sunny Studio Supplies Used:

Classic Gingham 6x6 Paper Shop at: Sunny Studio	Woodland Borders Dies Shop at: Sunny Studio	Holiday Cheer 6x6 Paper Shop at: Sunny Studio	Rustic Winter Dies Shop at: Sunny Studio	Sweater Vest Dies Shop at: Sunny Studio
Woodgrain Embossing Shop at: Sunny Studio	Season's Greetings Stamps Shop at: Sunny Studio	Scalloped Tags-Square Shop at: Sunny Studio	Sweet Treats Gift Bag Shop at: Sunny Studio