Merry Mice Cards with Rachel and Candice

Hello everyone! It's Rachel here and I have a winter slimline card to share with you today that focuses on the Merry Mice Stamp Set. To start my card, I first stamped all of my images onto a sheet of Neenah Solar White 110lb Card Stock with some Memento Tuxedo Black Ink. I then used Copic Markers to color everything and the coordinating dies to cut them out.

Copic Colors Used:

• Light Teal: BG10, BG15
• Dark Teal: BG11, BG13, BG49
• Light Ears: RV0000, RV11
• Dark Pink Ears: RV0000, R81, R85
• Grays: W0, W2, W4, W5
• Whites: 0, C00, C2, C4
• Reds: R35, R37, R59
• Browns: E40, E41, E42, E44

For my background, I trimmed a piece of smooth white card stock to 8.5" x 3.5" and then blended it with some Peacock Feathers. Evergreen Bough, and Tumbled Glass Distress Oxide Inks. I splattered this piece with some water and then lightly blotted it dry with a paper towel. I then splattered it with both diluted white and green paints. 

For some added interest, I stamped some trees from the Santa Claus Lane Set with Galactic Stream, Teal Cave, and Aqualicious Inks from Altenew. I used the Woodland Borders Die Set to add a stitched snow drift. Lastly, I adhered all of my images with some 3D Foam Adhesive Squares for added dimension.

I hope you enjoyed my card today! Wishing you all a safe and wonderful weekend!

--------------------------------------------------

Welcome back this fantastic Friday! Candice with you today sharing a sweet Christmouse scene with you today using the adorable Merry Mice stamp set!

I began my card by creating an 8 1/2 x 3 1/2 card base that fits perfectly into a standard or size 9A envelope. For the background, I first heat embossed the snow in white using the Frosty Flurries stamp set and lightly inked with squeezed lemonade and twisted citron.

I then die cut three snowhills from the Woodland Borders dies, two of them at an angle to get the dip in the center of my card. Next, I stamped all the adorable mice, trees, presents, and accessories from the Merry Mice stamp set, colored with Copic markers, and die cut out using the Merry Mice coordinating dies.

To finish the card, I heat embossed the sentiment in white and inked over with milled lavender and trimmed into a long banner. Thank you for visiting today!

Sunny Studio Supplies Used:

Frosty Flurries Stamps Shop at: Sunny Studio	Woodland Borders Dies Shop at: Sunny Studio	Santa Claus Lane Stamps Shop at: Sunny Studio	Santa Claus Lane Dies Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio
Merry Mice Dies Shop at: Sunny Studio

Sweet Treat Projects with Ana and Franci

Hello crafty friends! It Ana here today with a Christmas Sweet Treat Bag and Sweet Treat House Add-On! 

To create this bag, I used several patterned papers that matched my winter theme. Subtle Grey Tones 6x6 paper for the bag base. Very Merry 6x6 paper for the roof, door, bows, ornaments and tag topper. Holiday Cheer 6x6 paper for the trees and hedges. White 110lb cardstock for tag base, window and door frame. I started with die cutting the bag base from 2 pieces of grey paper and adhering them together.

Out of red paper, I die cut the roof base and 6 pieces of shingles layering them together with glue tape then adding them to the top of the bag. I cut the door, bows ornaments and a star out of the same red paper.

I used Woodland Borders dies to die cut the trees, wreath and hedges (which are mini tag toppers turned upside down). Using the same die set (Woodland Borders) I die cut the snow out of glitter paper.

I adhered all the elements to the bag and added Glossy accents to the wreath bow and ornaments and Wink of Stella to the other two bows. Finally, I stamped the To/From to the tag and tied it to the handle with twine.

This adorable treat bag was so much fun to make and I love the way it turned out! I really hope you enjoyed today’s post and got inspired. Thank you so much for stopping by today and until next week I wish you happy crafting!

--------------------------------------------------

Hello there and happy Wednesday! Franci here with you today showcasing the Sweet Treat Bag die set.

Aww look at this cute festive treat bag!! First of all I created my bag by die-cutting the main piece out of white cardstock.  Then I trimmed to size this red patterned paper panel (using a design from the Very Merry Paper pad) and I glued it on the front.

I cut out another piece of patterned paper from the same pad (I love this snowy design!) and glued it down too. I left this a little bit taller than my goodie bag so I could fold it over and secure my treat box closed.

Then I stamped colored and die cut some cute images from the Merry Mice set, colored them with Copics and cut them out with their coordinated dies. I stuck them in this fun design and secured them to my goodie bag with some foam adhesive.

Finally I die cut the little tag and the snowflake (using the Snowflake Circle Frame die set) out of white cardstock and I stamped my "to: & from:" using some little stamps included in the Season's Greetings Stamps.

Finally I added some details with a white gel pen and close my little Christmas treat bag at the top with a small wooden clip. Thanks a lot for stopping by!

Sunny Studio Supplies Used:

Woodland Borders Dies Shop at: Sunny Studio	Holiday Cheer 6x6 Paper Shop at: Sunny Studio	Subtle Grey Tones Paper Shop at: Sunny Studio	Very Merry 6x6 Paper Shop at: Sunny Studio	Season's Greetings Stamps Shop at: Sunny Studio
Merry Mice Stamps Shop at: Sunny Studio	Merry Mice Dies Shop at: Sunny Studio	Snowflake Circle Frame Shop at: Sunny Studio	Sweet Treats Gift Bag Shop at: Sunny Studio
Sweet Treats House Add-on Shop at: Sunny Studio

Scenic Route Cards with Candice and Rachel

It's Candice with you today and I hope you are all getting ready for a fabulous weekend of crafting and I have some inspiration for you using the versatile Scenic Route stamp set! How many of you just had to get the adorable superheroes this summer and just haven't gotten to use them as much as you would like?! I decided to tie them into the holiday season, a perfect card for the comic lover in your family!

The Sunny Studio Stamps products I used are:

• Scenic Route stamp set & coordinating dies
• Super Duper stamp set & coordinating dies
• Santa Claus Lane stamp set (ho)
• Christmas Garland Frame die (christmas)
• Comic Strip Speech Bubbles die (frame)
• Woodland Borders dies
• Very Merry 6x6 paper pack
• Rainbow Pearls

I first die cut the frame, using the negative to frame my scene. I filled the scene first with the night sky pattern paper and added the copic colored and glittered hills under the moon.  Next, I colored the houses and used the coordinating dies to cut out and pop dotted along the hillside.

I then die cut the stitched snowhills, layering along the bottom of the card and pop dotted the frame on top of the scene. For the sentiments, I first heat embossed the you're my favorite super hero on two separate navy banners and then die cut multiples of the christmas, the top one out of red glitter. I then die cut the comic bubble out of the same navy and heat embossed the ho, ho, ho in white and pop dotted it next to the Christmas superhero. I added a few green pearls to tie in the green around the sentiment.

I hope you are inspired to use some of your summer sets for Christmas in different ways!

---------------------------------------------------------

Hello everyone! It's Rachel here and I have a card to share with you today that focuses on the new Scenic Route Stamp Set. I combined this set with some cute snowmen from the Feeling Frosty Set to create a fun winter scene.

To start, I first trimmed a piece of Neenah Solar White 110lb Card Stock to 8.5" x 3.5". I then blended the top portion of it with Spun Sugar and Shaded Lilac Distress Oxide Inks. I splattered this blend with both water and diluted Opaque White Paint to resemble snow. I also added a few white die cut snowflakes using the snowflake dies from the Snowflake Circle Frame Die Set.

I stamped my images with Memento Tuxedo Black Ink onto another sheet of Neenah Solar White 110lb Card Stock and colored them with Copics. I used the coordinating Scenic Route and Feeling Frosty die sets to cut them out once colored.

Copic Colors Used:

• Pinks: RV000, RV00, RV52, RV55, RV66, RV69
• Purples: BV000, BV02, BV13, BV17, BV08
• Whites: 0, C00, C0, C2, C4
• Greens: G20, G24, YG25, YG63
• Dark Gray: W5, W8
• Light Gray: W1, W3, W5
• Snow Drifts: BG0000, BG11, BG53

Once I had all of my scenery and images cut out, I adhered them carefully onto the front of my card where I wanted them to be aligned. I then used a paper trimmer to trim off any excess. I used the Woodland Border Dies to add a few extra stitched snow drifts. I stamped my sentiment onto the lower right corner of my lowest snow drift and lastly, adhered my snowmen with some 3D Foam Adhesive Squares for added dimension.

I hope you've enjoyed my card today! Thanks so much for dropping by! Wishing you all the most wonderful weekend!

Sunny Studio Supplies Used:

Woodland Borders Dies Shop at: Sunny Studio	Super Duper Stamps Shop at: Sunny Studio	Super Duper Dies Shop at: Sunny Studio	Comic Strip Speech Bubble Dies Shop at: Sunny Studio	Very Merry 6x6 Paper Shop at: Sunny Studio
Santa Claus Lane Stamps Shop at: Sunny Studio	Feeling Frosty Stamps Shop at: Sunny Studio	Feeling Frosty Dies Shop at: Sunny Studio	Scenic Route Stamps Shop at: Sunny Studio
Scenic Route Dies Shop at: Sunny Studio	Snowflake Circle Frame Shop at: Sunny Studio	Christmas Garland Frame Shop at: Sunny Studio

Christmas Garland Frame Focused Cards with Vanessa and Anja

Hello to you! Vanessa here today with a new Christmas card using the Christmas Garland Frame Die. This frame adds the special something to a card!

I first inked the front of a white card base with Distress Oxide Inks. Now I die-cut the trees from Rustic Winter Dies, the snowdrifts from the Woodland Borders Die and the Christmas Garland Frame Die from white cardstock and adhered everything to the card. I die-cut a frame from red cardstock and adhered it. 

I stamped the snowman from Feeling Frosty and the ornament from Happy Owlidays onto cardstock, colored them with Copics, die-cut them with the matching dies and adhered everything, adding a string to the ornament with a black marker. Finally, I stamped and heat-embossed the sentiment onto a strip of black cardstock, trimmed it and adhered it to the card.

Thanks for visiting today!

------------------------------------------------

Hi everyone, Anja here and today's card was made using die-cuts only. I combined the Christmas Garland Frame Die with the deer and birds from the Rustic Winter Dies set to create a winter scene.

First, I started with an A2 Bristol cardstock panel and blended on Distress Oxide Inks (Victorian Velvet, Worn Lipstick and Tattered Rose from the top; Tumbled Glass from the bottom). I let it dry completely and added random white paint splatters with a brush.

Next, I die cut the intricate tree bough frame from emerald cardstock using an additional metal shim in my die-cutting machine. I also die cut the deers and birds from dark brown and red carstock. I stacked the sentiments from the Merry Mice set and stamped them in VersaMark Ink onto a piece of vellum. Then I did some heat embossing with red embossing powder. To create a little banner, I used the Fishtail Banner Dies.

Thank you so much for stopping by! Have a wonderful day!

Sunny Studio Supplies Used:

Fishtail Banner Dies Shop at: Sunny Studio	Woodland Borders Dies Shop at: Sunny Studio	Happy Owlidays Stamps Shop at: Sunny Studio	Happy Owlidays Dies Shop at: Sunny Studio	Rustic Winter Dies Shop at: Sunny Studio
Feeling Frosty Stamps Shop at: Sunny Studio	Feeling Frosty Dies Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio	Christmas Garland Frame Shop at: Sunny Studio