Layered Poinsettia Cards with Eloise and Leanne

Hi friends, Eloise here and today I’m using the Layered Poinsettia’s Die Set to create some Christmas Tags. I used the Scalloped Tag Circle Dies for the base and also used the Woodgrain Embossing Folder for some added texture and the Merry Mice Stamp Set for the sentiment.

I started off with die cutting out all my layers of the poinsettia die from different shades of cardstock. I then layered them together and adhered them. While I was die cutting, I also cut out three Scalloped Circle Tags from white cardstock and also grey cardstock and then ran the white ones through with the Woodgrain Embossing Folder.

Next I cut down the grey pieces a little to create a diagonal look, added foam tape onto the bottom and adhered them onto my white tags at the bottom. I then adhered the poinsettia’s with foam tape too. For the sentiment I used the Merry Mice Stamp Set, curved the ‘Merry Christmas’ in my MISTI and stamped it with black ink onto the bases of the tags. Lastly, I tied two types of twine through the tops of each of the tags.

Thanks so much for stopping by today, I hope you enjoyed these tags and I’ll see you next week.

--------------------------------------------------

Hi crafty friends, Leanne here! I have another card to share that features the Layered Poinsettia. If you recall, my card from last week combined the poinsettia and buffalo plaid. I really loved that look so I have used that combination again for this week. I've used a very traditional color palette with some glittery accents for a more elegant design.

I started with an A2 sized card base. I cut a panel of white card stock about a quarter inch smaller than A2 dimensions. I added some black paint splatters then layered it on top of some black glitter card stock with foam tape. I created a red and black plaid strip using a stamp from the Background Basics set. I adhered this strip towards the left side. I stamped out some pine boughs from the Christmas Trimmings set. I created the Layered Poinsettia using dark green card stock for the bottom layer and white for all the petals. I used a light green ink pad with a sponge dubber to add shading to the larger petal edges and completely color the tiny petals. 

Before adhering the pine boughs and poinsettia, I heat embossed the greeting in silver. The Merry Christmas greeting also comes from the Christmas Trimming set. To finish off the card, I frosted the poinsettia petals with Nuvo White Blizzard Glitter Drops and scattered a few dots of Nuvo Sliver Crystals Glitter Drops. 

Sunny Studio Supplies Used:

Background Basics Stamps Shop at: Sunny Studio	Christmas Trimmings Stamps Shop at: Sunny Studio	Christmas Trimmings Dies Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio
Layered Poinsettia Dies Shop at: Sunny Studio	Scalloped Tags-Circle Shop at: Sunny Studio

Embossing Folder Focused Cards with Leanne and Eloise

Hello everyone, Leanne here! Have you started decorating for the holidays yet? I just love the Farmhouse style of decorating especially for Christmas. It was this decorating trend that inspired my card today. Most of the Farmhouse Christmas decor ideas I've seen include buffalo plaid, so for my card I created a green and black plaid background using the Buffalo Plaid Embossing Folder. 

To achieve the green and black plaid, I started with green card stock and then I used Onyx Black VersaFine to ink up the embossing folder before running it through my die cut machine. I added the embossed plaid panel to an A2 sized card base. I die cut one of the Fancy Frames Rectangles to place in the center of the plaid background.

The Farmhouse decorating style is known for it's simplicity so I followed suit and kept this card design fairly clean and simple. I die cut the "Merry Christmas", using the Christmas Garland Frame Dies, from black glitter card stock and adhered to the frame at an angle. I then used the Layered Poinsettia dies to create a single flower to add just below the greeting. For a little bit of embellishment, I added a few clear sequins to finish off the card. 

------------------------------------------------

Hi friends, Eloise here and today I’ll be using the Woodgrain Embossing Folder along with Merry Mice to create a Christmas card.

I started off with stamping out my images and colouring them in with Copic Markers. I cut them out and then added white details using a gel pen.

(Copic Markers Used: B0000, B000 / YG03, YG23, YG25, YG17 / R000, R00 / R32, R35, R37, R39 / YR20, YR21, YR23, YR24 / W00, W0, W1, W3 / E50, E51, E53, E55 / E30, E31, E34, E35 / RV91, RV93, RV95, RV99 / RV63, RV66, RV69, R89 / 0)

I then took a piece of watercolour cardstock and ran that through my die cutting machine with the Woodgrain Embossing Folder. I then water-coloured a pink/purple circle into the centre.

Lastly, I adhered my images into place and white heat embossed the ‘Have A Mice Christmas’ sentiment onto a thin strip of black cardstock and adhered that on too.

Thanks so much for stopping by today and I’ll see you all next week. 

All retail purchases of any size will have 10% donated to Convoy of Hope to help with children’s feeding initiatives and disaster response.

And as always orders will also come with our mini holiday light bulb die (not pictured).

Sunny Studio Supplies Used:

Fancy Frames- Rectangles Shop at: Sunny Studio	Buffalo Plaid Embossing Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio	Merry Mice Dies Shop at: Sunny Studio
Layered Poinsettia Dies Shop at: Sunny Studio	Christmas Garland Frame Shop at: Sunny Studio

Hedgey Holiday Cards with Ana and Franci

Hello crafties! It’s Ana here today sharing a card and a tag using super adorable Hedgey Holidays stamp set as well as few other of my favorite products from Sunny Studio!

I stamped the hedgey three times, holly images twice, colored them with alcohol markers and cut them with coordinating dies. Presents and part of the sentiment are from Alpaca Holiday stamp set.

I used a snowy scene page from Very Merry 6x6 paper pack to create a background for both my card and tag, as well as red and green patterned papers from the same paper pack, for the card frame and tag topper. I cut an extra tag out of white cardstock and topper out of green patterned paper for the back side of the tag. For the card frame I used largest inside and outside Fancy Frames Square Dies and for the tag Build-A-Tag #2 Dies.

I assembled the card and tag adding snow pen to each below the hedgehogs and presents for some texture. Finally, I stamped the sentiment on the card background and To and From on the back of the tag with VersaFine Onyx Black ink and my projects were finished!

Thank you so much for stopping by today! I hope you’re enjoying all the hedgey cuteness we are sharing with you this week!

-----------------------------------------------

Hello crafty friends! Franci here with you today and I'm super happy to share a project featuring the mini Hedgey Holidays set!!

Aww this little festive critter is sooo adorable!! First of all I created a card base out of white cardstock and I cut out a white matching panel. I added some sparkle watercolor splatters on it, let everything dry completely and stamped my sentiment in the bottom right corner.

As everything was dry I added the wood detail using the Woodgrain Embossing folder and die cut the Christmas word out of some sparkle glittered gold cardstock using a die from the Christmas Garland Frame die. I stamped, colored and die cut all the images (I also added some holly and little hearts from the Santa Claus Lane set and the Hogs & Kisses one) and I added some details with a white gel pen. 

I arranged all my critters and all the other elements on to the panel that I previously glued down to my card with some liquid glue (or you can use strong double sided adhesive) to give the idea of a little Christmas tree shape and the card is complete!

Awww I love this so much, hope you like it too! 

All retail purchases of any size will have 10% donated to Convoy of Hope to help with children’s feeding initiatives and disaster response.  

And as always orders will also come with our mini holiday light bulb die (not pictured).

Sunny Studio Supplies Used:

Fancy Frames-Square Dies Shop at: Sunny Studio	Alpaca Holiday Stamps Shop at: Sunny Studio	Alpaca Holiday Dies Shop at: Sunny Studio	Build-A-Tag #2 Dies Shop at: Sunny Studio	Very Merry 6x6 Paper Shop at: Sunny Studio
Woodgrain Embossing Shop at: Sunny Studio	Santa Claus Lane Stamps Shop at: Sunny Studio	Santa Claus Lane Dies Shop at: Sunny Studio	Hogs & Kisses Stamps Shop at: Sunny Studio
Hogs & Kisses Dies Shop at: Sunny Studio	Christmas Garland Frame Shop at: Sunny Studio

Layered Poinsettias Cards with Rachel and Candice

Hello friends! It's Rachel here and I have a card to share with you today that features the new Layered Poinsettia Die Set. To start my card, I first created my poinsettia by cutting the various layers in different shades of red card stock. I also cut one layer of leaves from green card stock. In order to get the illusion of added depth, I blended each piece lightly on the edges with some Distress Ink that was slightly darker than the card stock itself.

Also, I used small pieces of 3D Adhesive Foam Squares when adding each layer to also add some more dimension. If you preferred less dimension, you'd simply need to glue your layers together. Once my flower was assembled, I set it aside and worked on my card background. Since I loved the look of the Woodgrain Embossing Folder on my previous card, I used the same technique on this card. I added some brown ink to the front panel of my embossing folder and ran a piece of 4.25"x4.25" Kraft card stock through my machine. I then layered this woodgrain piece with both a square white and green piece of card stock.

For some added interest, I die cut another piece of green card stock with the Snowflake Circle Frame Die and added this to the center of my card. I then used this set to also cut some white snowflakes as accents. For my sentiment, I used the "Wishes" word die from the Layered Snowflake Frame Die and die cut my sentiment from white card stock. I glued this piece to the front of my card and added the word "Christmas" (from the Merry Mice Stamps Set) by heat embossing it with Fine Detail White Embossing Powder onto a strip of black card stock. Lastly, I added a few small White Pearls to the centers of my snowflakes and poinsettia.

I hope you've enjoyed my card today! Wishing you all a lovely weekend!

-------------------------------------------------------

Welcome back my crafty friends, it's Candice with you again this Friday sharing an elegant Christmas card for you today using the new Layered Poinsettia dies! 

The fabulous Sunny Studio Stamps products I used are:

• Layered Poinsettia dies
• Layered Snowflake Frame die (winter wishes)
• Santa Claus Lane stamp set (sentiment)
• Frilly Frames Stripes die (background)
• White Pearls

I began my card by creating an 8 1/2 x 3 1/2 card base which will fit nicely into the size 9A envelopes.

To create my background, I die cut strips from shimmer paper with the Frilly Frames Stripes die and using the negative for a guide, glued them to a piece of cardstock that I trimmed to fit on the front.

Next, I die cut the poinsettia leaves from the same shimmer paper. I then cut out three sets of the poinsettia petals, inking each layer with chipped sapphire, then faded jeans and topped with stormy sky.  

For my large sentiment, I die cut the winter wishes from silver and multiples from scrap white cardstock and layered. I then heat embossed the sentiment in silver and trimmed to create a banner. For a simple embellishment, I added a few white pearls.

Thank you so much for visiting!

Sunny Studio Supplies Used:

Frilly Frames Stripes Die Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Santa Claus Lane Stamps Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio	Layered Poinsettia Dies Shop at: Sunny Studio
Layered Snowflake Frame Shop at: Sunny Studio	Snowflake Circle Frame Shop at: Sunny Studio