Layered Poinsettia Cards with Eloise and Leanne

Hi friends, Eloise here and today I’m using the Layered Poinsettia’s Die Set to create some Christmas Tags. I used the Scalloped Tag Circle Dies for the base and also used the Woodgrain Embossing Folder for some added texture and the Merry Mice Stamp Set for the sentiment.

I started off with die cutting out all my layers of the poinsettia die from different shades of cardstock. I then layered them together and adhered them. While I was die cutting, I also cut out three Scalloped Circle Tags from white cardstock and also grey cardstock and then ran the white ones through with the Woodgrain Embossing Folder.

Next I cut down the grey pieces a little to create a diagonal look, added foam tape onto the bottom and adhered them onto my white tags at the bottom. I then adhered the poinsettia’s with foam tape too. For the sentiment I used the Merry Mice Stamp Set, curved the ‘Merry Christmas’ in my MISTI and stamped it with black ink onto the bases of the tags. Lastly, I tied two types of twine through the tops of each of the tags.

Thanks so much for stopping by today, I hope you enjoyed these tags and I’ll see you next week.

--------------------------------------------------

Hi crafty friends, Leanne here! I have another card to share that features the Layered Poinsettia. If you recall, my card from last week combined the poinsettia and buffalo plaid. I really loved that look so I have used that combination again for this week. I've used a very traditional color palette with some glittery accents for a more elegant design.

I started with an A2 sized card base. I cut a panel of white card stock about a quarter inch smaller than A2 dimensions. I added some black paint splatters then layered it on top of some black glitter card stock with foam tape. I created a red and black plaid strip using a stamp from the Background Basics set. I adhered this strip towards the left side. I stamped out some pine boughs from the Christmas Trimmings set. I created the Layered Poinsettia using dark green card stock for the bottom layer and white for all the petals. I used a light green ink pad with a sponge dubber to add shading to the larger petal edges and completely color the tiny petals. 

Before adhering the pine boughs and poinsettia, I heat embossed the greeting in silver. The Merry Christmas greeting also comes from the Christmas Trimming set. To finish off the card, I frosted the poinsettia petals with Nuvo White Blizzard Glitter Drops and scattered a few dots of Nuvo Sliver Crystals Glitter Drops. 

Sunny Studio Supplies Used:

Background Basics Stamps Shop at: Sunny Studio	Christmas Trimmings Stamps Shop at: Sunny Studio	Christmas Trimmings Dies Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Merry Mice Stamps Shop at: Sunny Studio
Layered Poinsettia Dies Shop at: Sunny Studio	Scalloped Tags-Circle Shop at: Sunny Studio

Season's Greetings Cards with Eloise and Leanne

Hi everyone, Eloise here and today I’m using the Season’s Greetings Stamp Set along with Scenic Route to create a Christmas card.

I started off with ink blending some blue Distress Inks onto a white piece of cardstock. I then white heat embossed the large ‘Season’s Greetings’ from the stamp set onto the piece also.

(Copic Markers Used: BV01, BV02, BV04, BV08 / V01, V12, V15, V17 / BG10, BG11, BG13, BG49 / RV10, RV13, RV25, RV19 / R12, R14, R17, R27 / YR00, YR02, YR14, YR18 / Y11, Y13, Y15, Y19 / YG01, YG03, YG23, YG17 / B91, B93, B95, B97 / YG61, YG63, YG67, G28 / B000, B000, 0 / Y00 / E41, E42, E43, E44)

Next I stamped out a couple of the images from Scenic Route Stamp Set and coloured them in with Copic Markers. Once they were coloured, I cut them out. I then added foam tape onto the backs and adhered them down onto the bottom of the panel. Lastly, I added white gel pen details onto the images and added snow into the sky.

Thanks so much for stopping by today and I’ll see you next week.

----------------------------------------------

Hello everyone and happy November! Leanne here, and I have a mix and match card design to share today. I've mixed old and new stamps to create a little holiday scene with a bold greeting.

I started with an A2 size card base. I used Chipped Sapphire Distress Oxide ink to color the top half of the card front. I generously splattered the sky with thinned white paint. I then white heat embossed Merry Christmas from the Season's Greetings stamp set. I also added a few heat embossed snow flakes to the sky. I stamped the additional greeting ... "have a magical holiday" which is from the Santa Claus Lane set. 

I Copic colored images from Santa Claus Lane and Gleeful Reindeer to build my little holiday scene. I created two layers of snowy hills from glitter card stock using the Woodland Border dies. Instead of having the hills go all the way down to the bottom of the card, I decided to add a decorative border. I used a stamp from the Background Basics set to create the diagonal red and white stripes and that completed my card.  

Sunny Studio Supplies Used:

Gleeful Reindeer Dies Shop at: Sunny Studio	Gleeful Reindeer Stamps Shop at: Sunny Studio	Background Basics Stamps Shop at: Sunny Studio	Season's Greetings Stamps Shop at: Sunny Studio	Season's Greetings Dies Shop at: Sunny Studio
Santa Claus Lane Stamps Shop at: Sunny Studio	Santa Claus Lane Dies Shop at: Sunny Studio	Scenic Route Stamps Shop at: Sunny Studio	Scenic Route Dies Shop at: Sunny Studio

Layered Poinsettia Cards with Angelica and Juliana

Hi Friends! Angelica here, and I am so excited to share my first Christmas Release project! Today we are focusing on the beautiful Layered Poinsettia Die Set.

I started by pulling out random scraps of pink card stock. I used a cactus green card stock for the back piece. Before assembling the flower together, I used Scor Tape to add a small minus (-) side magnet to the middle of the green bottom layer. I die-cut the pieces, then pieced the poinsettia together with thin foam squares and glue.

I used the stripe stamp from the Background Basics stamp set to add red stripes, then stamped and gold heat-embossed a sentiment from the Petite Poinsettias stamp set. I trimmed the panel down, and added the positive magnet to the back of the panel with Scor Tape. I used thin foam squares to attach the panel to a cactus green panel. I used the new Buffalo Plaid Embossing Folder to emboss white card stock, and attached it to a card base. I added the stamped panel with Scor Tape to the card base to finish the card.

Now the recipient has a pretty Poinsettia that can be kept out when it's time to put the Christmas cards away! I hope I have given you ideas on ways to use this die. That's all that I have for today. Thanks for stopping by!

------------------------------------------------------

Hello Sunny Studio Friends! It's Juliana here and today I'm excited to share my first Christmas card of the season! I'm featuring the Sunny Studio Layered Poinsettia Die paired with the Christmas Garland Frame Die and the Woodgrain Embossing Folder for a slightly rustic design.

I began by die cutting a mix of red, green and yellow cardstock using the Layered Poinsettia Die. After all the die cutting, I lightly inked the edges using Vintage Photo Distress Ink and an ink blending tool. Using a fine tipped liquid adhesive applicator, I adhered all of the layers together. I found it helpful to refer to the instructions that come with the die to help line up all the layers. I repeated this twice to have a flower for each corner of my card.

Next, I took a piece of green cardstock and die cut it using the tree garland frame from the Christmas Garland Frame Die. This die is super intricate and I highly recommend using a metal shim to get a clean cut with your manual die cutting machine.

I knew I wanted to achieve a slightly rustic feel, so I cut a piece of white cardstock to 4.25 x 5.5 inches and embossed it with the Woodgrain Embossing Folder. I then adhered the tree garland frame on top of this. For the sentiment, I die cut a piece of yellow cardstock using the Merry Christmas phrase from the Christmas Garland Frame Die. I adhered this to the center of the framed piece. I then adhered the poinsettia die cuts using double sided foam adhesive. For further embellishment, I added some berries using the red pearls from the Rainbow Pearls.

Thanks so much for stopping by today! I hope you enjoyed the slightly rustic style Christmas Card featuring the Layered Poinsettia Die, Christmas Garland Frame Die and Woodgrain Embossing Folder.

Sunny Studio Supplies Used:

Petite Poinsettias Stamps Shop at: Sunny Studio	Background Basics Stamps Shop at: Sunny Studio	Buffalo Plaid Embossing Shop at: Sunny Studio	Woodgrain Embossing Shop at: Sunny Studio	Layered Poinsettia Dies Shop at: Sunny Studio
Christmas Garland Frame Shop at: Sunny Studio

Slice Of Summer Cards with Mona and Franci

Hi crafty friends! It's Mona here, today I am showing you a yummy and fresh card featuring the Slice of Summer stamp set.

This time I started the card making with stamp layering. For the stamping I used Hybrid Inks from Scrapbook.com and green colored mini ink cubes from Altenew. As you can see I also stamped a few leaves from the Hawaiian Hibiscus stamp set. For the leaves I used the Bamboo, Parrot and Moss colors. For the lemon I used the Yellow Group. When it was done I die-cut the images with the coordinating dies.

The next step was the background which I made with teal and blue watercolors. While it dried I run it through my die-cut machine with the new Frilly Frames Chevron Dies.

Next I heat embossed the sentiment to a pink piece of cardstock and created pink hearts from the same pink cardstock as an embellishment.

In the end I styled my card and adhered the tasty images to my card base, embellished the card and yay, it was done. Thank you very much for reading through my post, I hope that you have enjoyed it and I have inspired you! If you like my creations let's be friends on Instagram. :)

------------------------------------------

Hello there! Franci here with you today and I'm super happy to show you my first project with the new amazing summer release!! I'll showcase the Slice Of Summer set today with a cool watermelon card.

I love layering sets but what I love the most of them is having solid images that I can shade myself playing with inks. That's what I did here with my watermelon slices. I just used a red ink pad and I stamped the 3a layer multiple times, dabbing the ink away with a clean towel along the bottom of the slice. That created a natural shaded effect that I love!

I cut all my slices out with the coordinating dies and then I stamped the seeds and all the green parts with the same technique. I also die cut the card panel out of white cardstock using the new Frilly Frames Stripes die and stamped it with the Background Basic stamp set in a light teal ink.

Then I die cut the word Hello Word die from some double sided foam tape and I foiled it in gold rose. I glued everything down with a combo of liquid glue and foam tape and mounted my decorated panel onto a white card base.

Hope you like my card and thank you so much for stopping by today :) 

Sunny Studio Supplies Used:

Background Basics Stamps Shop at: Sunny Studio	Hello Word Die Shop at: Sunny Studio	Frilly Frames Chevron Die Shop at: Sunny Studio	Frilly Frames Stripes Die Shop at: Sunny Studio	Hawaiian Hibiscus Stamps Shop at: Sunny Studio
Hawaiian Hibiscus Dies Shop at: Sunny Studio	Slice of Summer Stamps Shop at: Sunny Studio	Slice of Summer Dies Shop at: Sunny Studio